Safety tips for sheet metal parts manufacturing
You are here: Home » News » Industrial Knowledge » Safety tips for sheet metal parts manufacturing
Phone : +86-15968042418
Tel : +86-574-28859156  
​Fax : +86-574-86643579

Safety tips for sheet metal parts manufacturing

Views: 0     Author: Site Editor     Publish Time: 2019-09-24      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Sheet metal parts manufacturing is considered a very dangerous job, so you should be very careful and follow all safety procedures to avoid injuries, accidents, and even death. The content of this article is very important, I think you have It is necessary to understand.


l  Workers need to pay attention

l  Wear protective clothing

l  Avoid back and neck injuries

l  Check tool


Workers need to pay attention


Sheet metal parts processing requires the use of large machines, so the most important thing is that sheet metal workers should be careful and concentrate on their work. Workers may need to push or pull metal plates to the machine, so you should not wear jewelry, or the clothes are loose because they may get stuck and entangled in the machine. Keep in mind that you need to pay attention to every stage of sheet metal parts manufacturing because sheet metal becomes very hot and sharp during processing.


Wear protective clothing


When working in a steelmaking environment, it is recommended that sheet metal workers always wear protective clothing such as gloves, goggles and helmets. Goggles are especially important because debris and small metal fragments can be discharged from the machine and hit unprotected workers, which can cause blindness. It is also very important to wear a pair of suitable safety shoes. Safety shoes will prevent any accidental slippage or instability, which is very dangerous to handle hot metal and presses, as well as other types of equipment. Always wear protective clothing and do not leave it in the toolbox or in your car.


Avoid back and neck injuries


Keep in mind that the two most common injuries that workers make when making metal sheets are back and neck injuries. Remember, if a sheet metal worker is seriously injured at work, he may leave work for a few months until he returns to health. For a sheet metal part worker, it is also important to learn how to lift heavy objects with leg muscles instead of the back, neck and arm muscles. This way, you can avoid fatigue or injury to your back. For sheet metal parts workers, it is safer to have a machine dedicated to handling large and heavy metal sheets. Such devices can carry heavier weight than your body, so if you use these lifting appliances, you will not take health risks.


Check tool


Another possible safety precaution is to check the tools (ie grinders and scissors) for signs of failure. Make sure they are in good working order to avoid rust or damage. This is because sheet metal workers often have to operate manual and hand tools. If a pair of scissors is blunt, you will find it difficult to cut metal sheets with them, posing a great health risk to you and your colleagues.


5 required sheet metal processing tools

l  Drilling machine. Drilling machines are a necessity for sheet metal operations. Drilling machines are tools used to place holes in sheet metal.

l  Vertical or horizontal belt grinding machines. This tool is used to grind and make sheet metal sections horizontal so they can be used. It works at two speeds and grinds the metal to the proper smoothness.

l  Hand punch. This small tool is still very important in sheet metal processing. It is used to punch holes in lighter steel plates and looks a bit like a wrench. It cuts metals such as copper and aluminum.

l  Tubing pipe bending machine. This tool is used to bend copper pipes and other types of metals. It is made of steel and has a special arm tool that is placed into a pipe and then pushed to make the pipe bend as needed.

l  Shrinkers and stretchers. This strange sounding tool is used to make sheet metal when the machine needs to stretch or shrink a piece of metal so that it can be made into the desired shape.


In the case of some workers making fast-moving sheet metal parts, this is actually a time when workers are more likely to get hurt. They have various dangers and companies should train them and tell them these safety tips to keep them concerned about their safety.

China OEM Metal Parts Manufacctuer -Custom CNC Machining , CNC Turning , CNC Milling & Metal Stamping Parts. Material Involved in Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Plastic, etc.




Copyright  2023 Ningbo OEM Industry Manufacturer Ltd. All rights reserved.   Sitemap
 Ready To Start Your Project?