Permissible deviations in mm for ranges in nominal lengths | f (fine) | Tolerance class designation (description) | v (very coarse) | |
m (medium) | c (coarse) | |||
0.5 up to 3 | ±0.05 | ±0.1 | ±0.2 | - |
over 3 up to 6 | ±0.05 | ±0.1 | ±0.3 | ±0.5 |
over 6 up to 30 | ±0.1 | ±0.2 | ±0.5 | ±1.0 |
over 30 up to 120 | ±0.15 | ±0.3 | ±0.8 | ±1.5 |
over 120 up to 400 | ±0.2 | ±0.5 | ±1.2 | ±2.5 |
over 400 up to 1000 | ±0.3 | ±0.8 | ±2.0 | ±4.0 |
over 1000 up to 2000 | ±0.5 | ±1.2 | ±3.0 | ±6.0 |
over 2000 up to 4000 | - | ±2.0 | ±4.0 | ±8.0 |
Permissible deviations in mm for ranges in nominal lengths | f (fine) | Tolerance class designation (description) | v (very coarse) | |
m (middle) | c (coarse) | |||
0.5 up to 3 | ±0.2 | ±0.2 | ±0.4 | ±0.4 |
over 3 up to 6 | ±0.5 | ±0.5 | ±1.0 | ±1.0 |
over 6 | ±1.0 | ±1.0 | ±2.0 | ±2.0 |
Permissible deviations in degrees and minutes for ranges in nominal lengths | f (fine) | Tolerance class designation (description) | v (very coarse) | |
m (middle) | c (coarse) | |||
up to 10 | ±1º | ±1º | ±1º30' | ±3º |
over 10 up to 50 | ±0º30' | ±0º30' | ±1º | ±2º |
over 50 up to 120 | ±0º20' | ±0º20' | ±0º30' | ±1º |
over 120 up to 400 | ±0º10' | ±0º10' | ±0º15' | ±0º30' |
over 400 | ±0º5' | ±0º5' | ±0º10' | ±0º20' |
Ranges in nominal lengths in mm | Tolerance class | ||
H | K | L | |
up to 10 | 0.02 | 0.05 | 0.1 |
over 10 up to 30 | 0.05 | 0.1 | 0.2 |
over 30 up to 100 | 0.1 | 0.2 | 0.4 |
over 100 up to 300 | 0.2 | 0.4 | 0.8 |
over 300 up to 1000 | 0.3 | 0.6 | 1.2 |
over 1000 up to 3000 | 0.4 | 0.8 | 1.6 |
Ranges in nominal lengths in mm | Tolerance class | ||
H | K | L | |
up to 100 | 0.2 | 0.4 | 0.6 |
over 100 up to 300 | 0.3 | 0.6 | 1 |
over 300 up to 1000 | 0.4 | 0.8 | 1.5 |
over 1000 up to 3000 | 0.5 | 0.8 | 2 |
Ranges in nominal lengths in mm | Tolerance class | ||
H | K | L | |
up to 100 | 0.5 | 0.6 | 0.6 |
over 100 up to 300 | 0.5 | 0.6 | 1 |
over 300 up to 1000 | 0.5 | 0.8 | 1.5 |
over 1000 up to 3000 | 0.5 | 1 | 2 |
Tolerance class | ||
H | K | L |
0.1 | 0.2 | 0.5 |