Market of auto parts stamped parts

The application of stamped parts is very extensive. They can also be used in auto parts due to its unique advantages. You can understand the following.

Point：

Auto parts stamped parts process

Auto parts stamped parts development status

Advantages of using stamped parts on the car

Auto parts stamped parts process

The stamping process parameters are the relevant parameters of the stamping process. The stamping part process parameters mainly refer to the specifications of the equipment used for this stamping part, the depth, pressure, part size and other data of the stamping part in each process debugging are called process parameters. To put it simply, the parameters of qualified stamping parts can be produced according to the data requirements.

The steamed parts are the units that make up the whole car and the stamped parts that serve the car. The processing of stamped parts of automobile parts is the production technology of product parts with certain shape, size and performance by means of the power of conventional or special stamping equipment, which directly deforms and deforms the sheet in the mold. Sheets, molds and equipment are the three elements of stamping.

Auto parts stamping processing is a metal cold deformation processing method. It is one of the main methods of metal plastic processing and is also part of material forming engineering technology. The mold used in the stamped parts of the auto parts is called a stamping die, referred to as a die. Dies are special tools for batch processing materials (metal or non-metal) into the required punches. Dies are essential in stamping. There are no dies that meet the requirements. Batch stamping production is difficult to carry out; without advanced dies, advanced stamping processes cannot be achieved. The stamping process and the mold, stamping equipment and stamping materials constitute the three elements of stamping processing, and only when they are combined with each other can the stamped parts of the auto parts be obtained.

Auto parts stamped parts development status

1. The development of China's auto parts stamped parts is almost entirely dependent on the domestic market. As the auto market has been in a low-level operation in recent years, the staggered parts of auto parts are struggling and face great survival and development pressure.

2. Most companies in China's auto parts stamped parts do not have independent development and self-innovation capabilities. With the accelerated pace of vehicle replacement and the implementation of various standard regulations for pollution control, the market requires that the automotive parts stamped parts enterprises provide marketable varieties and improve the technical content of the products. However, most companies cannot adapt to the changing speed of market demand, and some are unable to adjust products, and some are slow to adjust. The reason is that in addition to the lagging factors of enterprise restructuring, the lack of innovation ability for many years has always been a problem that has not been solved between enterprises and the market.

3. Dependence is big. Throughout China's auto parts stamped parts industry, due to China's long-term emphasis on the construction of vehicle production, spare parts production and construction is relatively backward, often relying on the survival of large enterprise groups.

4. Most of China's auto parts stamping parts enterprises are small and medium-sized enterprises. Like other small and medium-sized enterprises in China, their development is restricted by many environmental factors.

Advantages of using stamped parts on the car

1.Stamped parts processing has high production efficiency, easy operation and easy mechanization and automation. This is because the stamping relies on die and stamping equipment to complete the processing.

2.Since the die ensures the size and shape accuracy of the stamped parts during stamping, it has high dimensional accuracy, uniform size with the same module, and good interchangeability. No further machining is required to meet general assembly and use requirements.And generally does not destroy the surface quality of them, and the life of the mold is generally longer, so the quality of the stamping is stable, the interchangeability is good。

3.Stamping can process parts with large size range and complicated shape, such as stopwatch as small as clock, as large as car longitudinal beam, cover, etc., plus cold deformation hardening effect of material during stamping, strength and rigidity of stamping Both are higher.

4.Stamping generally has no chip waste, less material consumption, and no need for other heating equipment, so it is a material-saving, energy-saving processing method, the cost of stamped parts is lower.

If you want to use stamped parts as a car accessory, you can contact us!