Maintenance of 5 axis CNC horizontal milling machine

The spindle of the 5 axis CNC horizontal milling machine is arranged horizontally, alongside the worktable of the machine tool. In order to increase the handling range and also use functions, the CNC turntable or universal CNC turntable is typically included in realize 4 ~ 5 axis machining. By doing this, not just the continuous revolving shape on the side of the workpiece can be processed, but additionally, the "four-sided processing" can be recognized by altering the terminal via the turntable in one installment.

The normal upkeep job is separated right into complying with 3 stages:

1. Prior to the beginning of work. 

2. During work.

3. After the work is completed.

1. Prior to the beginning of work. Examine whether the different parts of the 5 axis CNC horizontal milling machine are total and whether the handle components are regular; tidy each part of the device tool, check the lubricating tools, and directly oil the maker tool overview rail surface area; begin the 5 axis CNC horizontal milling machine at reduced speed as well as idling for a particular period of time.

2. During work. It is mostly to operate correctly, do not permit the equipment to work overload, as well as not to make use of accuracy machine tools for rough machining. If any type of irregularity of the 5 axis CNC horizontal milling machine is located throughout the functioning procedure, it needs to be shut down right away for inspection.

3. After the work is completed. Clean all parts of the 5 axis CNC horizontal milling machine, relocate the moving parts of the machine device to the defined components, and also turn off the power.

Primary upkeep:

The 5 axis CNC horizontal milling machine, as well as milling machine, normally states that after 800 hrs of advancing procedure, the driver is the main operator to perform a key upkeep, and also the maintenance job must be carried out after the power supply is disconnected.

1. Outside upkeep.

2. Upkeep of headstock and also feed transmission.

3. Maintenance of workbench and guide rail.

4. Upkeep of rear column.

1. Outside upkeep. It is mostly to tidy up the dust as well as rust on the surface of the machine tool and also preserve the sanitation of the transmission components. Clean the surface area as well as a cover of the maker tool without corrosion as well as no macula; wipe all subjected screws, smooth rods as well as racks; fill in the takes care of, screws, nuts and also other components to keep the appearance of the device tidy.

2. Upkeep of headstock and also feed transmission. Lift up the dust-proof cover of the spindle box, check and change the V-belt and the pin box clamping pole. Tidy the filters and oil grooves; inspect the tightness of the balance hammer cable rope; wipe the chute of the revolving plate as well as readjust the inserts.

3. Maintenance of workbench and guide rail. Wipe all parts of the worktable of the straight boring and milling device, check as well as change the gap in between the stopper as well as the insert; inspect whether the overview rail is harsh, polish the burr and also clean the guide rail.

4. Upkeep of rear column. After wiping the bearing seat as well as the overview rail surface, check and readjust the gap in between the inserts.